TL - Smoother PLUS
TL-Smoother is a plug-in module for 3D printer stepper motor drives.
The board provides flyback diodes (freewheeling diodes) for the motor output, so they also prevent induced voltages in the unpowered state of the drive.
Especially on the DVR8825 stepper drive or the triangular 3D printer under the A4988/2 drive, you get a smoother movement.
Product Features
1- TL-Smoother can effectively eliminate the mechanical chatter generated by the 3D printer motor, especially for machines with parallel mechanism configuration. Lower vibration and smoother noise.
2- TL-Smoother is a plug-in module for 3D printer stepper motor drives. The board provides flyback diodes (freewheeling diodes) for the motor output, so they also prevent inductive voltages in the driver's unpowered state.
3- Especially on a triangular 3D printer under the DVR8825 stepper drive or the A4988/2 drive, you get a smoother movement. I3 and UM models can also be used, and different machines will have different shearing effects.
Feature:
1. 8 large package (SMC) diodes provide better heat dissipation and can handle larger motors than small diodes.
2. Reduce vibration, reduce noise, and make the results smoother.
3. All boards use chip diodes, strong consistency, more stable signal and longer service life.
4. How to use: Connect this TL-Smoother module to the corresponding drive socket and motor of the motherboard
Specification:
Product weight: 0.0120 kg
Product size: 4.00 x 3.00 x 1.50 cm / 1.57 x 1.18 x 0.59 inches
Package weight: 0.0300 kg
Package size: 8.00 x 6.00 x 2.00 cm / 3.15 x 2.36 x 0.79 inches
Package Contents:
Package Contents: 1 x TL - Smoother, 1 x Dupont Thread