Pololu Simple High-Power Motor Controller 24v12
The Pololu Simple Motor Controllers are versatile, general-purpose motor controllers for brushed,
DC motors.
A wide operating range of up to 5.5–40V and the ability to deliver up to several hundred
Watts in a small form factor make these controllers suitable for many motor control applications.
With a variety of supported interfaces—USB for direct connection to a computer,
TTL serial for use with embedded systems, RC hobby servo pulses for use as an
RC-controlled electronic speed control (ESC), and analog voltages for use
with a potentiometer or analog joystick—and a wide array of configurable settings,
these motor controllers make it easy to add basic control of brushed DC
motors to a variety of projects. Although this motor controller has many more
features than competing products, a free configuration utility (for Windows 7, Vista, Windows XP, and Linux)
simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB.
For 24V applications, we recommend the 24v12 or 24v23 versions.
We strongly recommend against using the 18v7, 18v15, or 18v25 with 24V
batteries, which can significantly exceed 24V when fully charged and are dangerously
close to the maximum voltage limits of these lower-voltage controllers.
Key Features
- Simple bidirectional control of one DC brush motor.
- 5.5V to 30V (18v7, 18v15, and 18v25) or 40V (24v12 and 24v23) operating supply range.
- 7A to 25A maximum continuous current output without a heat sink, depending on controller model
-
Four communication or control options:
- USB interface for direct connection to a PC.
- Logic-level (TTL) serial interface for direct connection to microcontrollers or other embedded controllers.
- Hobby radio control (RC) pulse width interface for direct connection to an RC receiver or RC servo controller.
- 0–3.3V analog voltage interface for direct connection to potentiometers and analog joysticks.
-
Simple configuration and calibration over USB with free configuration program (Windows 7, Vista, Windows XP, and Linux compatible).
מידות
Size: | 2.1" x 1.1" x 0.2" |
---|---|
Weight: | 7 g1 |
מאפיינים כלליים
Motor channels: | 1 |
---|---|
Control interface: |
USB; non-inverted TTL serial; RC servo pulses; analog voltage2 |
Minimum operating voltage: | 5.5 V |
Maximum operating voltage: | 40 V |
Continuous output current per channel: | 12 A3 |
Maximum PWM frequency: | 21.77 kHz |
Maximum logic voltage: | 3.3 V4 |
Reverse voltage protection?: | N |
Partial kit?: | Y |