Maxbotix XL-MaxSonar-EZ1 Sonar Range Finder MB1210
The Maxbotics XL-MaxSonar family of sonar range finders offers very short- to long-range detection and ranging in an incredibly small package with low power consumption. The XL-MaxSonar detects objects from 0 to 7.65meters (25feet) and provides sonar range information beyond 20cm (8") with a resolution of 1cm resolution (0.4in). Objects between 0 and 20cm range as 20cm. An efficient transformer uses 0.5W of power to drive the transducer, yielding high-output acoustic power. This acoustic power, combined with continuously-variable gain, real-time automatic calibration, real-time waveform signature analysis, and real-time noise rejection algorithms, results in virtually noise-free distance readings for most applications, even in the presence of various acoustic or electrical noise sources. The XL-MaxSonar distance sensor is available in five factory-calibrated beam patterns (EZ/AE0-4).
For a less-expensive, lower-resolution, shorter-range version, please consider the LV-MaxSonar-EZ family of distance sensors.
מפרט טכני
- Small and light: 0.870"x0.785"x0.989" (2.2x2.0x2.5cm), 0.22oz (6.1g)
- Long range detection: 0 – 7.65m (25ft)
- No dead zone; detections from 0 to 20cm (8in) are output as 20cm
- Resolution of 1cm (0.4in)
- Low typical current consumption: 3.4mA at 5V, 2.1mA at 3.3V
- Runs on 3.3 – 5V
- 42kHz ultrasonic sensor
- 10Hz reading rate
- Readings can be triggered externally or internally
-
Supports three interfaces (all are active simultaneously):
- Serial output of distance reading: asynchronous, logic-level (TTL), inverted, 9600 bps 8N1
- Analog output of distance reading: (Vcc/1024) / cm (4.9mV/cm when input voltage Vcc = 5V)
- Pulse width output of distance reading: 58μs/cm (147μs/in) on EZ models only
-
Analog voltage envelope of return acoustic wave form on AE models only
מידות
| Size: | 0.870" x 0.785" x 0.989" |
|---|---|
| Weight: | 6.1 g |
מאפיינים כלליים
| Resolution: | 1 cm |
|---|---|
| Maximum range: | 7.65 m |
| Minimum range: | 0 cm1 |
| Sampling rate: | 10 Hz |
| Baud: | 9600 bps |
| Minimum operating voltage: | 3.3 V |
| Maximum operating voltage: | 5 V |
| Supply current: | 3.4 mA2 |