12V 3A 4CH 200M Wireless Remote Control Relay Switch
Instructions:
- 1. Press the learning code, the indicator flash, loosen your finger, press any button of the remote control, the indicator flash
- 2. times and off, it means you learn it successfully .
- 3. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control.
- 4. remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully.
Output working way:
- 1. Self-lock ---connect the JP1 with the cutting out cap.
- 2. Jog---the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
- 3. Inter-lock---- Connect the Jp2 with the Cutting out cap,Jog---- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
- Self -lock----- press one button for one time is ON, press the same button again is OFF (need one channel switch and one button remote control).
-
Inter-lock-------press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Specifications:
Receiver:
- 1.working voltage :for DC12V
- 2.quiescent condition :less than 6mA
- 3.working temperature :-40'c+80'c
- 4.receiver sensitivity : more than -105dBm
- 5.working frequency :315MHz here is in set .we have made it work together ,so you don't have to care about what frequency are they .
- 6.output voltage:for DC and AC is optional
- 7.output current : less than 3A
- 8.max load current:10A
- 9. Dimensions: 72mm*52mm*26mm
Remote control transmitter :
- 1. Remote Distance: 200M
- 2. Operating Voltage: for DC 12V
- 3. Frequency: 315mhz
- 4. Operating Current: 13 mAh
- 5. Code Type: Fixed code / Learning code
- 6. Dimensions: 58 x 39 x 14mm
Package include
- 1 x Transimitter
- 1 x Receiver