8Channel Bi-Directional Logic Level Converter TXS0108E
The TXS0108E 8 channel (8-bit) bi-directional level-shifter (logic level converter) works with both open-drain and push-pull configurations. This 8-bit translator uses two separate configurable power-supply rails. The A port tracks the VA (VCCA) pin supply voltage. The VA pin accepts any supply voltage between 1.2 V and 3.6 V. The B port tracks the VB (VCCB) pin supply voltage. The VB pin accepts any supply voltage between 1.65 V and 5.5 V.
When the output-enable (OE) input pin is low, all outputs are placed in the high-impedance (Hi-Z) state.
To ensure the Hi-Z state during power-up or power-down periods, tie OE to GND through a pull-down resistor.
When the output-enable (OE) input pin is low, all outputs are placed in the high-impedance (Hi-Z) state.
To ensure the Hi-Z state during power-up or power-down periods, tie OE to GND through a pull-down resistor.
Product Contents:
- 1 piece - TXS0108E 8-Bit Bi-Directional Logic Level Converter Module
- 2 pieces - 1x10 Pin Male Header with 2.54mm (0.1") Spacing
Specifications:
- A Port Voltage Range: 1.2 to 3.6 V
- B Port Voltage Range: 1.65 to 5.5 V
-
Maximum Data Rates:
- 110 Mbps (Push Pull)
- 1.2 Mbps (Open Drain)
- Board Dimensions: 25mm x 15mm (0.985" x 0.591") / Long x Wide
- Weight: 2.6g (0.092oz)
Resources: