210:1 Micro Metal Gearmotor HP
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed
DC motor with 210:1 metal gearbox, similar to Sanyo’s popular 12mm gearmotors.
These units have a 0.365"-long, 3mm-diameter D-shaped output shaft.
Key specs at 6V: 140RPM and 70mA free-run, 50oz-in (3.6kg-cm) and 1.6A stall.
These tiny brushed DC gearmotors are intended for use at 6V, though in general,
these kinds of motors can run at voltages above and below this nominal voltage,
so they should comfortably operate in the 3 – 9V range (rotation can start at voltages as low as 0.5V).
Lower voltages might not be practical, and higher voltages could start negatively
affecting the life of the motor.
The micro metal gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and offer a choice between two different motors:
high-power (HP) and standard. With the exception of the
1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions,
so one version can be easily swapped for another if your design requirements change.
Please see the micro metal gearmotor comparison table for detailed specifications of all our micro metal gearmotors.
This dynamically-sortable table can help you find the gearmotor that offers
the best blend of speed, torque, and current-draw for your particular application.
מידות
| Size: | 24 x 10 x 12 mm |
|---|---|
| Weight: | 0.34 oz |
| Shaft diameter: | 3 mm |
מאפיינים כלליים
| Gear ratio: | 210:1 |
|---|---|
| Free-run speed @ 6V: | 140 rpm |
| Free-run current @ 6V: | 70 mA |
| Stall current @ 6V: | 1600 mA |
| Stall torque @ 6V: | 50 oz·in |
| Extended motor shaft?: | N |
